Galvanic baths
- Chrome plating baths (chromium VI): carcinogenic, respiratory irritant
- Nickel plating baths: allergenic
- Zinc plating baths (acidic/alkaline)
- Cyanide baths: highly toxic, reaction with acids → HCN gas
- Pickling baths (HCl, H2SO4): strongly corrosive
- Degreasing baths (alkaline, solvent-containing)
Electroplating: highest protection level
For cyanide baths, obtain competent assessment of incompatibilities, protective measures and emergency procedures for the actual substances and processes. Coordinate medical emergency preparedness with occupational health and workplace emergency personnel.
Chromium VI-containing chrome plating baths are carcinogenic (TRGS 905, Category 1A). Classification and workplace measures require competent review.
Exhaust air, bath covering and moisture control (hydrogen formation) also belong in the instruction. MeineGBU takes these requirements from sections 7 and 8 of the SDS.
MeineGBU prepares an editable DOCX draft on the MeineGBU platform. The SDS is one information source; the actual activity, risk assessment and competent review determine the instruction approved for your workplace.
Frequently asked questions
What must an operating instruction contain?
Section 14 GefStoffV specifies substance and hazard information, protective measures, and responses to incidents and emergencies. TRGS 555 explains the structure, including work area and activity, first aid and disposal. The workplace risk assessment determines the specific content.
Is one operating instruction per substance group enough?
Group instructions may be suitable where hazards and protective measures are comparable. Check the risk assessment and TRGS 555 to determine whether a shared instruction covers the actual activities.
Who signs the operating instruction?
The employer or a designated responsible person (e.g. managing director, workshop manager, occupational safety specialist). The signature confirms the binding nature of the instruction.